Project

General

Profile

ATmCamInfo » History » Version 6

Ting Li, 11/26/2014 01:21 PM

1 5 Ting Li
h1. aTmCam daily checklist
2 1 Thomas Diehl
3 5 Ting Li
DES Observer 1 is expected to check that the dome for aTmCam is open and that 4 cameras are powered.
4 5 Ting Li
The check is to be done every night after DES obsereving has started. (after you enable obstac)
5 5 Ting Li
6 5 Ting Li
There are two files that you need to check:
7 1 Thomas Diehl
obsdome.log is to log when the dome of aTmCam open and close
8 1 Thomas Diehl
obsccd.log is to log when the instrument is powered on/off and starts/stops observation
9 5 Ting Li
These logs can only be seen within CTIO network, normally.
10 1 Thomas Diehl
11 5 Ting Li
After observer1 enable obstac,
12 5 Ting Li
* To check if the dome for aTmCam is open, please go to: 
13 5 Ting Li
http://atmcam.ctio.noao.edu/atmcamlogs/obsdome.log  
14 5 Ting Li
and scroll all the way down and find some words like "south panel open" and "north panel open" and check that this is the latest action and the time of these actions are from today (in UTC). If the dome is not open, then ask Telops to open it.
15 5 Ting Li
* To check if the cameras are powered on, please go to:
16 5 Ting Li
http://atmcam.ctio.noao.edu/atmcamlogs/obsccd.log 
17 5 Ting Li
and scroll all the way down and find some words like "Establishing a link to the USB 1/2/3/4 Camera" and "Link Established to Camera" and check that this is the latest action and the time of these actions are from today (in UTC). Make sure that all 4 cameras are connected.
18 5 Ting Li
* if either of these is not OK (i.e. dome cannot open or cameras are not powered on) email Ting Li (sazabi@tamu.edu) or find her on skype using the skype on the Observer1 computer.
19 6 Ting Li
* if everything is working, then put a new entry in the elog saying "aTmCam is checked".