Project

General

Profile

ATmCamInfo » History » Version 21

Ting Li, 10/07/2016 10:53 AM

1 5 Ting Li
h1. aTmCam daily checklist
2 1 Thomas Diehl
3 8 Ting Li
h2. Afternoon checklist
4 8 Ting Li
5 8 Ting Li
Run manager is expected to check that the data taken by aTmCam from previous night are good.
6 8 Ting Li
The check is to be done every day before 4pm meeting.
7 8 Ting Li
8 8 Ting Li
All the aTmCam results are available at 
9 8 Ting Li
http://atmcamdata.ctio.noao.edu/atmcam_summary/   (only accessible when you are within CTIO network)
10 11 Ting Li
There's one folder for each night in this directory. The folder is named in the manner of Julian Date-UT Date. The UT date should be the night when the observation starts (same as the definition for DES). For example, 2457043-20150120 mean that the results belong to data taken from the night 20150120. 
11 12 Ting Li
Everyday afternoon, run manager should check that the results from previous night are good, when the weather is good and the dome is open on previous night. To do so:
12 8 Ting Li
* Open a browser, go to http://atmcamdata.ctio.noao.edu/atmcam_summary/, scroll all the way down and find the date of previous night
13 8 Ting Li
* In the folder, open the image with name like *_plot_position.png. The image shows the scatter plots of the star position on 4 CCDs. The star position should be all close to the center of the CCD (see good example below). The color-coding is irrelevant. If only one or two dots are not near the center, that's OK. This could be a mis-detection due to the cosmic ray.
14 21 Ting Li
* If the weather from previous night is good but there's no plot, or there's nothing in the plot, or the star positions are scattered around, or the star positions are not near the center (see bad examples below), then email Ting Li (tingli@fnal.gov) or find her on skype using the skype on the Observer1 computer.
15 8 Ting Li
16 8 Ting Li
Good examples, see
17 14 Ting Li
http://atmcamdata.ctio.noao.edu/atmcam_summary_2014/2457043-20150120/2457043-20150120_plot_position.png 
18 20 Ting Li
%{color:red}Note: From Aug 2015, CCD1 is slightly shifted, so it's centered near x=200, y=400. This is normal. Also due to the earthquake in Sept 2015, the pointing is slightly off. So if you see position plots slightly scattered, it's also normal. Here's an example:%
19 1 Thomas Diehl
http://atmcamdata.ctio.noao.edu/atmcam_summary/2457367-20151210/2457367-20151210_plot_position.png
20 21 Ting Li
%{color:red}If you are not sure about the night is good or not, the best way to check this is to compare the position plot with those from the previous nights and see if there are any significant changes.%
21 17 Ting Li
22 8 Ting Li
Bad examples,
23 8 Ting Li
see
24 14 Ting Li
http://atmcamdata.ctio.noao.edu/atmcam_summary_2014/2457017-20141225/2457017-20141225_plot_position.png   (scatter around)
25 1 Thomas Diehl
http://atmcamdata.ctio.noao.edu/atmcam_summary_2014/2457012-20141220/2457012-20141220_plot_position.png   (not in the center)
26 21 Ting Li
27 10 Ting Li
28 8 Ting Li
h2. Beginning-of-night checklist
29 9 Ting Li
30 1 Thomas Diehl
DES Observer 1 is expected to check that the dome for aTmCam is open and that 4 cameras are powered.
31 8 Ting Li
The check is to be done every night after DES observing has started. (after you enable obstac)
32 5 Ting Li
33 5 Ting Li
There are two files that you need to check:
34 1 Thomas Diehl
obsdome.log is to log when the dome of aTmCam open and close
35 1 Thomas Diehl
obsccd.log is to log when the instrument is powered on/off and starts/stops observation
36 5 Ting Li
These logs can only be seen within CTIO network, normally.
37 1 Thomas Diehl
38 5 Ting Li
After observer1 enable obstac,
39 5 Ting Li
* To check if the dome for aTmCam is open, please go to: 
40 5 Ting Li
http://atmcam.ctio.noao.edu/atmcamlogs/obsdome.log  
41 7 Ting Li
and scroll all the way down and find some words like "south panel open" and "north panel open" and check that this is the latest action and the time  (in UTC) of these actions are from the evening of today (maybe 1-2 hours before you check). If the dome is not open, then ask Telops to open it.
42 5 Ting Li
* To check if the cameras are powered on, please go to:
43 5 Ting Li
http://atmcam.ctio.noao.edu/atmcamlogs/obsccd.log 
44 7 Ting Li
and scroll all the way down and find some words like "Establishing a link to the USB 1/2/3/4 Camera" and "Link Established to Camera" and check that this is the latest action and the time (in UTC) of these actions are from the evening of today (maybe 1-2 hours before you check). Make sure that all 4 cameras are connected.
45 5 Ting Li
* if either of these is not OK (i.e. dome cannot open or cameras are not powered on) email Ting Li (sazabi@tamu.edu) or find her on skype using the skype on the Observer1 computer.
46 6 Ting Li
* if everything is working, then put a new entry in the elog saying "aTmCam is checked".
47 16 Ting Li
48 16 Ting Li
h2. Checklist for TelOps at Blanco
49 16 Ting Li
50 16 Ting Li
From Sept 2015, we asked TelOps and the daily support to make a 3-step checklist for aTmCam. The instruction for the checklist and the manual is available at docdb:
51 16 Ting Li
52 16 Ting Li
http://des-docdb.fnal.gov:8080/cgi-bin/ShowDocument?docid=8166
53 16 Ting Li
54 16 Ting Li
Please make sure that TelOps follow the instructions and check the status of aTmCam regularly.