Project

General

Profile

ATmCamInfo » History » Version 2

Thomas Diehl, 11/24/2014 06:46 PM

1 1 Thomas Diehl
h1. ATmCam Procedures
2 1 Thomas Diehl
3 1 Thomas Diehl
DES Observer 1 is expected to check that aTmCam is open and that the CCDs are powered.
4 1 Thomas Diehl
The check is to be done every night after obsereving has started. 
5 1 Thomas Diehl
obsdome.log is to log when the dome of aTmCam open and close
6 1 Thomas Diehl
obsccd.log is to log when the instrument is powered on/off and starts/stops observation
7 2 Thomas Diehl
These logs can only be seen at CTIO, normally.
8 1 Thomas Diehl
9 1 Thomas Diehl
* Check obsdome.log at http://atmcam.ctio.noao.edu/atmcamlogs/obsdome.log  to see that the dome is open tonight
10 1 Thomas Diehl
* Check obsccd.log at http://atmcam.ctio.noao.edu/atmcamlogs/obsccd.log  to make sure all 4 CCDs are powered on. 
11 1 Thomas Diehl
* if either of these is not OK email Ting. (sazabi@tamu.edu)