ATmCamInfo » History » Version 2
DES Observer 1 is expected to check that aTmCam is open and that the CCDs are powered.
The check is to be done every night after obsereving has started.
obsdome.log is to log when the dome of aTmCam open and close
obsccd.log is to log when the instrument is powered on/off and starts/stops observation
These logs can only be seen at CTIO, normally.
- Check obsdome.log at http://atmcam.ctio.noao.edu/atmcamlogs/obsdome.log to see that the dome is open tonight
- Check obsccd.log at http://atmcam.ctio.noao.edu/atmcamlogs/obsccd.log to make sure all 4 CCDs are powered on.
- if either of these is not OK email Ting. (email@example.com)