Project

General

Profile

SV Notes for MJD 56245 (starting evening of November 13)

Observers

Observer 1 Observer 2 Run Manager SISPI Expert on Call Eyeball Squad QR
Elliot Martini/Kent Gerdes Elliot Gruen/March Angelo

DECam Configuration and Setup

SISPI Configuration File sv.ini
DECam constants DECAM:CURRENT
Proposal ID 2012B-0003
Image Processing (Calibration) NCSA
Image Processing (First Cut) NCSA

Almanac

Twilight ends 21:47, middle of night to hand over to community SV at 01:27

Moonset at 20:22 0% illuminated, 154 degrees away from our Mini-Survey field on Stripe 82. Dark for our full half-night!

Weather Conditions

Observing Plan and Goals for the Night

  1. Standard bias and dome flat sequence during afternoon
  2. Please try to get dome open for temperature equilibration at earliest appropriate time, be sure all cooling/ventilation systems are on.
Monitor Conditions:
  1. Check on DIMM status, running if at all possible. [Jiangang: I noticed the DIMM seeing changes over the past 3 days, but they change once and fixed there. See my attached image]
  2. Make sure RASICAM is online if weather conditions permit.
  3. A few times per night ask the operator to contact the other telescopes on Tololo to get their seeing value. Record those in the eLog.

Expectation for tonight is clear weather, decent seeing, tracking with modest ellipticity (<~0.1), poorer tracking N of zenith?

Note: SN observations are particular about the pointing, but it is ok to accept whatever pointing the telescope produces when doing standards and minisurvey.

Priority for these dark nights is to obtain any remaining u observations, finish gr in the deep SN fields, and the take gr over the MiniSurvey1a region. Next priority is to get iz observations in the X3 and izY in C3 field - could do these when airmass is too large to do ug.

Prioritization for tonight's observations:
  1. Photometric standards sequence as soon as dark enough (ugrizY in 3 fields at different airmasses, preferably one at X < 1.25, one at X = 1.25-1.65 and one at X > 1.65) and again at handover to Dara. Conditions: clear or thin clouds, any seeing.
  2. SN Fields Take iz for deep field X3 Conditions required: Clear or thin clouds, <1.6" seeing; do this while airmass of CXS fields is X>1.4, switch to ugr for X<1.4.
  3. SN Fileds Complete uY for the S1,S2 field. Conditions required:_Clear or thin clouds, <1.6" seeing
  4. Observe MiniSurvey MS1a pointings, under OBSTAC control, should be choosing gr filters. Conditions required: clear or thin clouds, seeing <1.6".
  5. DECal sweeps Conditions required: Any.

Notes from the 4PM Meeting and Additional Comments

Notes from Observers

See Night summary



TASCA b-filter animated GIF for this night (time stamp in UT):
TASCA b-filter animated GIF for this night

Notes on Analyses of Night's Data: