Observing Plan for the January 4-5, 2015 Engineering Nights¶
The scripts for this engineering run can be found on the DECamObserver account under ExposureScripts/Engineering/engineering_20150104
Star Flats¶
See Star Flat Instructions for a list of potential fields for star flats. Priorities are griz, then Y, then u & VR.
New pointing model check-out¶
Primary Mirror & 4MAP tests¶
As a reference, here are the instructions to switch to the new Hexapod LUT (and back)¶
Switch to the new LUT¶
- Switch to new Hexapod LUT, using the open codemanager window on system1:
~codemanager/newLUT.cshwill switch to new LUT.
- restart the LUT role using the architect console
- watch the log message - after a while it prints out which HexapodLUT directory is used (should be HexapodLUT_v20141110 for the new LUT)
- a SISPI restart is NOT required
Restore original LUT¶
- to restore original Hexapod LUT, using the open codemanager window on system1:
~codemanager/oldLUT.csh
- restart the LUT role using the architect console
- watch the log message - after a while it prints out which HexapodLUT directory is used (should be HexapodLUT_v20141010 for the old LUT)
- a SISPI restart is NOT required