Project

General

Profile

Dome offsets and flat fields » History » Version 1

Version 1/3 - Next » - Current version
William Wester, 12/27/2013 10:44 AM


Dome offsets and flat fields

Introduction: pre-March 2013 it was noticed that there could be small mis-alignments when the dome was moved into position
for daily flat fields and/or DECal scans. A piece of safety tape was placed so that it would show proper alignment when
the dome was moved into proper position. Indeed, some of the early daily flat fields show a rim about 1/3 of a CCD wide
with response lower by about a percent.

It is difficult to diagnose whether the observation might be due to dome mis-alignment as the screen illumination comes from
four discrete stations mounted on the outer ring and the screen itself is nearly a perfect Lambertian reflector (brightness
is the same no matter the view onto the focal plane). This series of studies attempts to look at the effect of the dome flats
versus small offsets in the dome position to see whether the illumination pattern matches some of the early problematic daily
flats.