Project

General

Profile

OinkConsoleAccess

1. ssh to jpsicon.fnal.gov (as root, you are in the .k5login file on this node)
2. [root@jpsicon ~]# ipmitoollan oinkipmi reset
3. After about 30 seconds check to make sure oink is powered as follows ..
[root@jpsicon ~]# ipmitoollan oinkipmi power_status
Chassis Power is on
oinkipmi

IF you see the following (power is off, which does happen sometimes ..)

[root@jpsicon ~]# ipmitoollan oinkipmi power_status
Chassis Power is off
oinkipmi

Then do the following ..

[root@jpsicon ~]# ipmitoollan oinkipmi power_on

Amitoj.