Project

General

Profile

Cabling and racks

Crate and rack needs for the paddle system (MRD + veto)

16 channels per card - Lecroy 4300 ADC
362 MRD channels = requires 23 cards
70 Additional paddles = 5 more cards
assuming 22 cards per crate CMAC - 2 crates (ADC)

32 channels per module - Lecroy 3377 tdc
362 MRD channels = requires 12 cards
70 additional channels = 3 cards
takes half a crate

2 crates can cover both the adc and tdc

16 channels per card - Lecroy 4413 discriminator
1-2 crates for the discriminator

What do they use for amplifiers/splitters!!!?????

2 “crates” for the delay patch panels
2 “crates” for the splitters
1.5 crates for the amplifiers
1 trig logic crate

~11 “crates” - 2 racks

crate and rack needs for the water-PMTs

19 cards per VME crate
15 4-channel fADCs are needed for the 60 PMTs
this is one crate

250 PMTs will require 63 cards
3-4 crates

~1 rack for the water PMTs