Project

General

Profile

Spent time

Filters

Apply Clear

Hours: 1340.06

Date User Activity Issue Comment Hours
12/23/2019 John Diamond Deployment Task #23796: E:NUMIPWR Merged and redploy 1.00
12/23/2019 John Diamond Implementation Task #23796: E:NUMIPWR Implemented E:NUMIPWR 3.50
10/17/2018 Elliott McCrory Deployment Support #20732: Update firmware on all MI/RR Toroids Done 1.00
10/17/2018 Elliott McCrory Development Task #19507: Integrate cli command help that is in the wiki into @bpmcli help@ Done 10.00
10/17/2018 Elliott McCrory Implementation Task #20663: Separate IOTA ACNET code from BoosterBPMACNET.C and BoosterCrateACNET.C Scope? 0.50
10/17/2018 Elliott McCrory Implementation Task #19608: Crate status and control device Continuing work 2.00
10/17/2018 Elliott McCrory Implementation Task #20664: Orbit structure device for IOTA BPMs Ready for testing 10.00
10/16/2018 Elliott McCrory Implementation Task #20520: IOTA BPM TBT Array Device Awaiting final tests 2.00
10/16/2018 Elliott McCrory Implementation Task #20521: IOTA BPM Raw Array Device Completed 4.00
10/16/2018 Elliott McCrory Implementation Task #17353: Create ACNET devices Completed 4.00
10/03/2018 Elliott McCrory Implementation Task #17353: Create ACNET devices Started 1.00
10/01/2018 Elliott McCrory Implementation Support #20732: Update firmware on all MI/RR Toroids Software is probably done - Aisha is calibrating and will let us know if there are problems 10.00
09/07/2018 John Diamond Implementation Task #20352: Startup despite missing timing module implemented 1.00
09/04/2018 Elliott McCrory Analysis Support #20732: Update firmware on all MI/RR Toroids 1.00
08/31/2018 Elliott McCrory Analysis Task #20664: Orbit structure device for IOTA BPMs Notes from Chip Edstrom 0.50
08/31/2018 Elliott McCrory Analysis Task #20664: Orbit structure device for IOTA BPMs Notes from Chip Edstrom 0.50
08/31/2018 Elliott McCrory Deployment Task #20522: ACNET device for Arming IOTA BPMs Awaiting feedback from engineer 0.10
08/31/2018 Elliott McCrory Implementation Task #20522: ACNET device for Arming IOTA BPMs Implemented Digital Controls 2.00
08/31/2018 Elliott McCrory Analysis Task #20522: ACNET device for Arming IOTA BPMs Determining the ACNET requirements for this 2.00
08/30/2018 Elliott McCrory Implementation Task #20663: Separate IOTA ACNET code from BoosterBPMACNET.C and BoosterCrateACNET.C Ready for verification 2.00
08/30/2018 Elliott McCrory Implementation Task #20521: IOTA BPM Raw Array Device Ready for verification by engineer 8.00
08/26/2018 John Diamond Deployment Task #20683: Change node name for all BBPM15 devices DABBEL'd BBPL15 devices 1.00
08/23/2018 Elliott McCrory Implementation Task #20663: Separate IOTA ACNET code from BoosterBPMACNET.C and BoosterCrateACNET.C I think I have this completed 1.00
08/13/2018 John Diamond Implementation Task #20520: IOTA BPM TBT Array Device TBT array device work 4.00
08/03/2018 Elliott McCrory Analysis Task #20522: ACNET device for Arming IOTA BPMs What measurement are we trying to support? Is there more than one? 0.10
07/31/2018 John Diamond Development Task #20358: Request ACNET node assignment Deployed ACNET kernel 1.00
07/30/2018 John Diamond Development Task #20483: Create separate "stable" branches for Booster and IOTA BPMs Created git branches: booster_stable and iota_stable 0.50
07/28/2018 John Diamond Development Bug #20473: Control message queue is not destroyed on shutdown Bug fixed 0.50
07/28/2018 John Diamond Deployment Task #20474: Enter BPMs into bpmd.conf Configured BPMs for IOTA 0.50
07/27/2018 John Diamond Implementation Feature #20351: Support for 4-channel 2-dimensional BPMs Implemented 2-d BPMs with 2-d fit 8.00
07/26/2018 John Diamond Testing Task #20354: Adapter for IOTA DAQ module Verified raw and dsp data 1.00
07/26/2018 John Diamond Implementation Task #20354: Adapter for IOTA DAQ module Implemented TBT readout 4.00
07/25/2018 John Diamond Development Task #20354: Adapter for IOTA DAQ module Implement raw copy method 0.50
07/25/2018 John Diamond Implementation Task #20439: Implement DMA readouts for Raw and DSP data regions Implemented commands for raw and dsp DMA 2.00
07/25/2018 John Diamond Development Task #20354: Adapter for IOTA DAQ module Implemented Raw DMA readout 2.00
07/24/2018 John Diamond Development Task #20354: Adapter for IOTA DAQ module Implement event handling 4.00
07/24/2018 John Diamond Development Milestone #20375: Device driver for IOTA DAQ module Update specification & regenerated 0.50
07/23/2018 John Diamond Development Task #20409: Failure state for DAQSystem Implemented DAQSystemFailure 0.50
07/23/2018 John Diamond Development Task #20376: drvgen specification for IOTABPM250x8 Created IOTABPM250x8 specification from Alexei's register map 2.50
07/23/2018 John Diamond Development Task #20354: Adapter for IOTA DAQ module Stubbed out IOTABPM250x8DAQDeviceAdapter class. 2.00
07/23/2018 John Diamond Development Bug #20408: runtime_error in generated getDeviceInSlot() does not include the driver name Bug fixed 0.05
07/23/2018 John Diamond Deployment Bug #20371: TSI-148 bridge does not support a master window with multiple data transfer modes Bug fixed 0.25
07/23/2018 John Diamond Development Bug #20402: Constants generated for bitfields and enums can cause redeclaration Fixed 1.00
07/20/2018 John Diamond Deployment Task #20356: Request ethernet connection for crate and CPU Submitted network connection request 0.50
07/20/2018 John Diamond Development Milestone #20350: IOTA BPM deployment Created IOTA BPM test stand startup script 0.50
07/20/2018 John Diamond Development Task #20353: Adapter for NML timing module Implemented code for loading the configured TSG adapter 0.50
07/19/2018 John Diamond Development Task #20353: Adapter for NML timing module Implemented IOTATimeTSGDeviceAdapter class 0.50
07/19/2018 John Diamond Development Task #20377: IOTA State Machine Implemented IOTAStateMachine class 0.50
07/19/2018 John Diamond Development Task #20360: drvgen specification for NML timing module Got to drive to the point of detecting the present hardware 2.00
07/18/2018 John Diamond Deployment Task #20358: Request ACNET node assignment E-mailed request to Glenn 0.25
07/18/2018 John Diamond Deployment Task #20356: Request ethernet connection for crate and CPU Received network configuration 0.50
05/15/2018 Elliott McCrory Implementation Feature #12403: Create Virtual or Pseudo Devices Closed 0.10
05/01/2018 Elliott McCrory Implementation Task #19507: Integrate cli command help that is in the wiki into @bpmcli help@ Implemented these CLI help commands and committed to GIT 10.00
05/01/2018 Elliott McCrory Implementation Task #19608: Crate status and control device Implemented the devices specified here. Need to do further testing and then commit to GIT 20.00
04/11/2018 Elliott McCrory Implementation Task #19604: Remove redundant or unnecessarily long references from template code Completed? 0.00
04/11/2018 Elliott McCrory Implementation Task #19604: Remove redundant or unnecessarily long references from template code Simplifications implemented, committed and pushed. 8.00
01/25/2018 David Slimmer Implementation Bug #18773: Single turn plot not showing current data until you toggle single turn -> charge plot -> single turn 1.00
01/22/2018 Elliott McCrory Analysis Bug #18773: Single turn plot not showing current data until you toggle single turn -> charge plot -> single turn Front end problem? 0.20
01/22/2018 Elliott McCrory Testing Bug #18773: Single turn plot not showing current data until you toggle single turn -> charge plot -> single turn Extended wait time by 1/2 second 0.20
01/08/2018 David Slimmer Deployment Support #18695: State machine devices for Booster IPMs 1.50
01/05/2018 Elliott McCrory Deployment Bug #18630: R 104 H IPM plotting abnormalities Please verify that the problem has been resolved 0.10
01/05/2018 Elliott McCrory Deployment Feature #18631: IPM State does not change on I33 See Z page 0.00
01/02/2018 Elliott McCrory Deployment Feature #18631: IPM State does not change on I33 This has been resolved 1.00
01/02/2018 Elliott McCrory Implementation Feature #18631: IPM State does not change on I33 Have determined why spec reading does not change 0.50
01/02/2018 Elliott McCrory Analysis Bug #18630: R 104 H IPM plotting abnormalities Frequency of this glitch 0.01
12/28/2017 Elliott McCrory Testing Bug #18633: Data save files no longer being saved? Please verify that this is done. 1.00
12/28/2017 Elliott McCrory Testing Feature #18631: IPM State does not change on I33 Readback of the state device 0.10
12/28/2017 Elliott McCrory Implementation Idea #18634: Saved files list should be optimized for humans Completed 1.00
12/28/2017 Elliott McCrory Testing Bug #18633: Data save files no longer being saved? Update 0.10
12/28/2017 Elliott McCrory Testing Bug #18630: R 104 H IPM plotting abnormalities Not my problem? 0.10
12/28/2017 Elliott McCrory Testing Feature #18631: IPM State does not change on I33 Cannot verify 0.10
11/30/2017 John Diamond Deployment Task #18436: x86 support for Technobox XMC GigE adapter Built and configured ethernet driver 0.50
11/20/2017 John Diamond Deployment Milestone #18342: Network connection for booster BPM test stand Submitted network connection request for bbpmt2 0.50
11/17/2017 John Diamond Implementation Task #18324: Implement polynomial scaling Implemented n-order polynomial scaling 1.00
11/14/2017 John Diamond Implementation Task #17734: ACNET device BPM Orbit Correction Device (0x0022) Implemented Smooth Orbit readings and acnet devices 16.00
11/10/2017 John Diamond Deployment Task #17974: Create ACNET devices for B38 and B40 0.50
11/10/2017 John Diamond Deployment Task #17974: Create ACNET devices for B38 and B40 Renamed and created new ACNET devices for BBPMTS as location 21 0.50
11/10/2017 John Diamond Design Task #17734: ACNET device BPM Orbit Correction Device (0x0022) Thought about how to approach this 0.50
11/09/2017 John Diamond Implementation Task #18132: bpmcli commands for enabling/disabling state machine Implemented -e and -n options for sm_enable 4.00
11/08/2017 John Diamond Implementation Task #18149: Implement Booster BPM scaling Implemented booster BPM scaling 2.00
11/08/2017 John Diamond Deployment Task #18151: Configure BPMs for test stand at Booster location 21 Configured location 21 BPMs 0.50
11/08/2017 John Diamond Implementation Task #18132: bpmcli commands for enabling/disabling state machine Implemented state machine enable/disable commands for bpmcli 2.00
11/06/2017 John Diamond Implementation Task #18049: Refactor bpmcli 'show' command to be a CLICommand Implemented options 0.50
11/01/2017 John Diamond Implementation Task #17935: Booster BPM State Machine Began implementing StateMachine 4.00
10/31/2017 John Diamond Implementation Task #18049: Refactor bpmcli 'show' command to be a CLICommand Implemented as CLIShowCommand 1.00
10/30/2017 John Diamond Implementation Task #18044: Refactor bpmcli 'abort' command to be a CLICommand Implemented CLIAbortCommand 0.25
10/30/2017 John Diamond Implementation Task #18050: Refactor bpmcli 'shutdown' command to be a CLICommand Implemented CLIShutdownCommand 0.50
10/30/2017 John Diamond Implementation Task #18048: Refactor bpmcli 'readout' command to be a CLICommand Implemented CLIReadoutCommand 1.00
10/30/2017 John Diamond Implementation Task #18045: Refactor bpmcli 'arm' command to be a CLICommand Implemented CLIArmCommand 1.00
10/29/2017 John Diamond Implementation Task #18055: No beam threshold Implemented no beam threshold 1.00
10/29/2017 John Diamond Implementation Feature #18037: Support flagging that data could not be read when a DAQ module is missing/failed Implemented IReading::DataDescription::moduleStatus 2.00
10/26/2017 John Diamond Implementation Task #17999: Refactor to use getopt Integrated getopt in bpmcli 4.00
10/26/2017 John Diamond Implementation Task #18000: Support BPM lists in dump commands Implemented dump commands in the new CLICommand framework 8.00
10/23/2017 John Diamond Implementation Task #18009: Driver for Booster BPM transition board Generated and tested btransitionmod.ko 1.00
10/23/2017 John Diamond Implementation Task #17999: Refactor to use getopt Implemented CLICommand class 4.00
10/20/2017 John Diamond Deployment Task #17974: Create ACNET devices for B38 and B40 Created ACNET devices for BBPMTS 3.00
10/19/2017 John Diamond Implementation Task #17730: ACNET device BPM Orbit Group (0x001e) Implemented setting, basic status and basic control properties 1.00
10/19/2017 John Diamond Implementation Task #17729: ACNET device BPM Average Position (Snapshot) Orbit (0x0014) Implemented setting property 1.00
10/19/2017 John Diamond Implementation Task #17724: ACNET device BPM Turn-by-Turn Scaled Positon Implemented basic status and control 1.00
10/18/2017 John Diamond Implementation Task #17725: ACNET device BPM Single Turn Scaled Position (0x001f) Filled in missing fields 0.50
(1-100/677) Per page: 25, 50, 100, 5000

Also available in: Atom CSV