Project

General

Profile

To-Do List Jan 08th - Updated Jan 14th » History » Version 4

Michelle Stancari, 01/15/2016 03:04 PM

1 1 Tristan Blackburn
h1. To-Do List Jan 08th - Updated Jan 14th
2 1 Tristan Blackburn
 		
3 1 Tristan Blackburn
Giles Barr
4 1 Tristan Blackburn
List from the 11.30 meeting today
5 1 Tristan Blackburn
6 1 Tristan Blackburn
1 Turn counters on and see if the PTB can take the rate 
7 1 Tristan Blackburn
_(Done)_
8 1 Tristan Blackburn
9 4 Michelle Stancari
2 complete 2nd cob reinstallation _(Done)_
10 1 Tristan Blackburn
11 3 Michelle Stancari
3 wide drift window settings in config _(Done)_
12 1 Tristan Blackburn
13 1 Tristan Blackburn
4 plug penn trigger board in 
14 1 Tristan Blackburn
_(PTB trigger is in, and only trigger in, as of Mon Jan 11th - Tristan)_
15 1 Tristan Blackburn
_(Jan 14th - taken plenty of all rce, all ssp & PTB runs now with CCU1 & 2 switched on and a rate of ~0.3Hz - Things seem to be working well - Tristan)_ 
16 1 Tristan Blackburn
17 1 Tristan Blackburn
5 synchronisation tests
18 1 Tristan Blackburn
_(Alan redistributed the NOvA clock lines to the components [13th Jan]; the RCE's now miss less sync pulses and the timeout errors are significantly less frequent 35%->10% - Tristan)_ 
19 1 Tristan Blackburn
20 3 Michelle Stancari
6 Counter voltage study 20h, not needed to be continuous 4h hunks are convenient.  _(almost Done, 4 hours remain)_
21 1 Tristan Blackburn
22 1 Tristan Blackburn
7 Pedestal mode - PTB on very slow, take a long O(100ms) swath of unzero suppressed data) need to turn counter triggers off in config.
23 1 Tristan Blackburn
24 1 Tristan Blackburn
8 Calibration modes - discuss exactly what is needed and make configs
25 1 Tristan Blackburn
26 1 Tristan Blackburn
9 Second pedestal mode - random triggers with a normal millislice length, or pulser, but not aligned with 60Hz
27 3 Michelle Stancari
28 3 Michelle Stancari
New items from Michelle - Jan 15, 2016
29 3 Michelle Stancari
30 3 Michelle Stancari
1 Turn CCU3&4 (BSU counters) back on and implement a trigger prescale in the PTB configuration
31 3 Michelle Stancari
32 3 Michelle Stancari
2 Change the millislice length from 10 microslices to 20 microslices