HWR Slow Tuner Testing at CMTF
Testing of the slow tuner system for HWR has started. The valves and transducers
were exercised with manual controls and the stage 1 tuner hardware configuration.
The tuning range was measured for a couple of cavities. 7 of the 8 cavities have
been tested so far. An analog pressure regulation
loop available with the stage 1 hardware was also tested for all the cavities.
Cavity 8 is awaiting some connector parts for the tuner cable.
Initial test data is attached.
#1 Updated by Philip Varghese 9 months ago
- % Done changed from 0 to 90
- File HWR Slow Tuner Measurements_03_13_20.docx HWR Slow Tuner Measurements_03_13_20.docx added
- File HWR_Tuning_Range.png HWR_Tuning_Range.png added
Tuning range measurements were completed on cavity 7 and 8. The full measurement data for all
8 cavities is attached.