Terminate cables for HWR valves and pressure transducers
Work with Shrividhyaa to order the correct connectors, make sure the cable database is correct and then terminate the cables.
Ordered from Digi-Key quantity of 3 of each of the 3 connectors needed. Ordered backshells too.
Still in approval stages.
Current state of purchase requisition - still not approved by Christopher Jacobson. Attached is the daily email reminder to him.
Credit card order was made on Thursday 12/5/19. Should receive components any day now.
12/12/19 Connectors have arrived and I have wired the connectors for Channel 1. Next step is to incorporate the modifications to 1 Slow Tuner Module. Once 1 module meets requirements, the other 5 can be modified.
Modifications to board are shown on attached document.
Updated schematic is attached reflecting modifications done to 1 board.
- % Done changed from 0 to 50
All 8 terminations are done. The test jumper cable is broken. The socket pins are very fragile and break. The pins have been ordered and have back ordered and claimed to be delivered on 7/5/20. I cannot answer whether the database issue has been resolved.
- % Done changed from 50 to 100
- Status changed from New to Closed
Jumper cable is fixed. I believe this ticket is done.
Also available in: Atom