Project

General

Profile

Bug #2314

"Phase is Locked" LED is On when "805 REF IN" disconnected.

Added by Vitali Tupikov almost 8 years ago. Updated almost 3 years ago.

Status:
Closed
Priority:
Low
Assignee:
Start date:
12/16/2011
Due date:
% Done:

100%

Estimated time:
Duration:

Description

Having a "805 Ref In" signal disconnected from RF board, the
card's front panel LED reports that "Phase is Locked", which
could be misleading for user.

History

#1 Updated by Ed Cullerton over 7 years ago

  • Status changed from New to Feedback
  • Priority changed from Normal to Low
  • % Done changed from 0 to 100

This is a feature of the Wenzel phase locked oscillator. The specification does not require a phase lock indication when there is no RF connected to it. There are test points on the RF board to determine if RF is present.

#2 Updated by Ed Cullerton over 4 years ago

  • Status changed from Feedback to Resolved

This issue has been "resolved" by clarifying the problem and system specification. No request has been made to fix the "feature". A new redmine will be created if a request is made for an "upgrade".

#3 Updated by Ed Cullerton almost 3 years ago

  • Status changed from Resolved to Closed


Also available in: Atom PDF