Project

General

Profile

Bug #22762

Grey out make buttons inactive if not in use.

Added by Iker de Icaza Astiz over 1 year ago. Updated 12 months ago.

Status:
Closed
Priority:
Normal
Start date:
06/19/2019
Due date:
% Done:

100%

Estimated time:
Occurs In:
Co-Assignees:
Duration:

Description

After pushing a button successfully this should become inactive. Similarly the buttons that won't have any effect shouldn't appear active.


Related issues

Blocks ArtDaq RunControl GUI - Milestone #22444: v0_01_00: Plug and PlayClosed12/09/2019

History

#1 Updated by Iker de Icaza Astiz about 1 year ago

#2 Updated by Iker de Icaza Astiz about 1 year ago

#3 Updated by Iker de Icaza Astiz about 1 year ago

#4 Updated by Esteban Cristaldo 12 months ago

  • % Done changed from 0 to 90
  • Status changed from New to Feedback

In revision 5194cc54, buttons are enabled according to transitions states. End session, load configurations, load components buttons are only enabled in the stopped state. Transitions buttons are only enabled to issue commands in the direction of the arrows in the daq state diagram.

#5 Updated by Iker de Icaza Astiz 12 months ago

There was an addition to also make the db checkbox become inactive in revision 33ba1e9.

#6 Updated by Iker de Icaza Astiz 12 months ago

  • % Done changed from 90 to 100
  • Status changed from Feedback to Resolved

I've confirmed it works. Solved.

#7 Updated by Iker de Icaza Astiz 12 months ago

  • Status changed from Resolved to Closed

Merged to develop. Closing.

#8 Updated by Esteban Cristaldo 12 months ago

  • Status changed from Closed to Under Discussion

#9 Updated by Esteban Cristaldo 12 months ago

It was noted that the load components and load configurations were re-enabling in db mode. Also, it was noted that the Database Run Configurations button was not enabling and disabling accordingly to the transitions status.

in revision #0b0bfe3d, this bug is fixed.

#10 Updated by Iker de Icaza Astiz 12 months ago

  • Status changed from Under Discussion to Closed

Confirm it works. Merged to develop already. Closing again.

Also available in: Atom PDF