Project

General

Profile

Task #18436

Milestone #18435: Support for GigE ADCs

x86 support for Technobox XMC GigE adapter

Added by John Diamond almost 3 years ago. Updated almost 3 years ago.

Status:
Work in progress
Priority:
Normal
Assignee:
John Diamond
Start date:
11/30/2017
Due date:
% Done:

0%

Estimated time:
Spent time:
0.50 h
Duration:

Description

Build drivers for the XMC ethernet adapter into the Linux kernel and configure the local network for 192.168.0.1.

7259_Manual.pdf (2 MB) 7259_Manual.pdf Technobox Ethernet XMC 7259 Manual John Diamond, 11/30/2017 09:41 AM

History

#1 Updated by John Diamond almost 3 years ago

The Tecnobox adapter is based on the Intel I210 ethernet chip. The manual for the adapter is attached.

Enabled 'Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support' in the 3.16.7 kernel configuration.

Configured 'eth3' for the internal ADC network in /etc/network/interfaces:

auto eth3
iface eth3 inet static
address 192.168.0.1
netmask 255.255.255.0
network 192.168.0.0

Note: For the Concurrent boards it appears to be that eth0 is the front panel ethernet, eth1 and eth2 are the backplane VXS interfaces and eth3 is the Technobox adapter. This will probably be different for the 8100s.

Also available in: Atom PDF