Project

General

Profile

Task #17352

Milestone #17345: Comission M40TOR front end

Configure startup script

Added by John Diamond about 3 years ago. Updated about 3 years ago.

Status:
Assigned
Priority:
Normal
Assignee:
Category:
Deploy & Config
Start date:
08/03/2017
Due date:
% Done:

80%

Estimated time:
4.00 h
Spent time:
Duration:

Description

Create a boot area and startup script. Configure devices for each toroid.

History

#1 Updated by John Diamond about 3 years ago

  • Category set to Deploy & Config
  • Status changed from New to Assigned
  • Assignee set to John Diamond
  • % Done changed from 0 to 50

Built a development level release for m40tor target.

Copied and modified s60torstartup to a fresh m40torstartup. Configured I:TOR003, R:TOR003 and R:TOR330. Created filter chains but set scale factors to "1.0" (note: for the purpose of scaling the MDAT frames we are assuming that the filter chains will scale to e12). Configured the MDAT transmitter but left the commands commented out until I can verify that the transmitter is installed.

Installed m40torstartup.

Will test as soon as I have an ACNET node ID.

#2 Updated by John Diamond about 3 years ago

  • % Done changed from 50 to 80

Startup script boots and ACNET returns data through the MOOC canned devices. Waiting on a digitizer and TCLK connection (e-mailed Aisha & Ning on 8/7).



Also available in: Atom PDF