Project

General

Profile

Task #16717

Milestone #16710: Commission nmltrg

Configure startup parameters

Added by John Diamond over 3 years ago. Updated about 3 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Start date:
05/30/2017
Due date:
% Done:

100%

Estimated time:
1.00 h
Spent time:
Duration:

Description

Configure the startup parameters on nmltrg.

History

#1 Updated by John Diamond over 3 years ago

  • Status changed from Accepted to Resolved
  • % Done changed from 0 to 100

Configured startup parameters for nmltrg:

boot device          : dc0
processor number     : 0
host name            : fecode-bd
file name            : vxworks_boot/kernel/mv2400/v6_4/vxWorks
inet on ethernet (e) : 131.225.118.32:ffffff00
inet on backplane (b):
host inet (h)        : 131.225.121.145
gateway inet (g)     : 131.225.118.200
user (u)             : vxworks_boot
ftp password (pw) (blank = use rsh):
flags (f)            : 0x0
target name (tn)     : nmltrg_0x0da0
startup script (s)   : vxworks_boot/fe/nmltrg/nmltrgstartup
other (o)            :

Note that this is a 6.4 kernel

Also: noticed that there is no TCLK connection to the PMC-UCD. It might make more sense to configure for multicast instead of TCLK.

#2 Updated by John Diamond about 3 years ago

  • Status changed from Resolved to Closed


Also available in: Atom PDF