Task #16712
Milestone #16710: Commission nmltrg
Create ACNET devices
Description
Create ACNET devices for controlling both timing modules.
History
#1 Updated by John Diamond over 3 years ago
- File nmltrg_acnet_devices.tif nmltrg_acnet_devices.tif added
Attaching a list of ACNET devices that I received from Brian. He also said that we can keep the existing Z: devices for the second trigger module as only the first module will be used for operations.
#2 Updated by John Diamond over 3 years ago
Also -
Note that in the document Brian has specified default values for the Mux input and mode select.
#3 Updated by John Diamond over 3 years ago
- % Done changed from 0 to 80
Created the following ACNET devices:
ACNET Device | Description | Scaling |
---|---|---|
N:TRGDEL | Trigger Delays (indexes 0-11) for board @ 0x1000 | 12.30769/1000 microseconds per clock tick |
N:TRGMUX | Input MUX (indexes 0-11) for board @ 0x1000 | Modified the following setting values for FAST: 0 = FirstPulse (was BES) 4 = 3MHz (was BSYNC1) 5 = Gate (was BSYNC2) |
N:TRGINT | Timing interval | None |
N:TRGNTR | Number of triggers | None |
N:TRGOUT | Output select | Digital status and control bits defined |
#4 Updated by John Diamond over 3 years ago
- Status changed from Assigned to Closed
- % Done changed from 80 to 100
Devices were added to D150/FAST tab/Sub-page 5 & 6.
Added Mux register initialization commands to nmltrgstartup.