Project

General

Profile

Task #16531

Milestone #16524: Commission new toroid nodes at NML

Install hardware for NMLTR2

Added by John Diamond about 3 years ago. Updated about 3 years ago.

Status:
Work in progress
Priority:
Normal
Assignee:
John Diamond
Category:
Deploy & Config
Start date:
05/15/2017
Due date:
% Done:

80%

Estimated time:
1.00 h
Spent time:
3.00 h
Duration:

History

#1 Updated by John Diamond about 3 years ago

  • Estimated time set to 1.00 h

#2 Updated by John Diamond about 3 years ago

  • Category set to Deploy & Config
  • Status changed from New to Work in progress
  • Assignee set to John Diamond
  • % Done changed from 0 to 50

Installed CPU. Appears that the PMC-UCD is not recognized and may not to be replaced (TCLK is not pulled yet). No digitizer. E-mailed Ning.

#3 Updated by John Diamond about 3 years ago

Digitizer installed at A16 0x0000.

#4 Updated by John Diamond about 3 years ago

  • % Done changed from 50 to 80

#5 Updated by John Diamond about 3 years ago

Need to replace PMC-UCD and get TCLK pulled.

#6 Updated by John Diamond about 3 years ago

Replaced the PMC-UCD this morning. Verified that the card is recognized by the driver. Still no physical TCLK hook-up.

Also available in: Atom PDF