Project

General

Profile

Task #16023

Configure R:TOR703 for g-2 operation

Added by John Diamond about 4 years ago. Updated about 4 years ago.

Status:
Assigned
Priority:
Normal
Assignee:
John Diamond
Category:
Deploy & Config
Start date:
03/29/2017
Due date:
% Done:

70%

Estimated time:
2.00 h
Spent time:
2.75 h
Duration:

Description

Configure S60TOR / R:TOR703 to operate with ABC03 firmware ADC

History

#1 Updated by John Diamond about 4 years ago

E-mail from Aisha:

With the new firmware, please have the front end set the following registers at startup.
There will be no need for the averaging and current readouts as well as the dynamic gate width.

(SYNC_OUT mode) 0x115 = x0
(GateWidth , 12us) 0x2BA = x5DC
(#of RawSamples) 0x20C = x4000
(2^# = DecRate) 0x2B4 = x0
(#of AvgSamples) 0x2B7 = x4000
(SYNC delay) 0x2C0 = x0

#2 Updated by John Diamond about 4 years ago

Configured ADC according to Aisha's request.
Did not deploy because it appears to me that Ning has not deployed the latest PXIE firmware to S60TOR yet.
Did not configure injection sums and cycle devices yet.

#3 Updated by John Diamond about 4 years ago

Ning deployed the new firmware on Friday. Deployed my new startup script and latest VMEInt build to S60TOR on Sunday.

Implemented a command in VMEIntCommandsADC for setting the raw sample size.

Verified the list of registers are being set properly with one excepetion:

I think Aisha got 0x2b4 and 0x2b7 reversed. For now I have them configured as:
  • 0x2b4 = 0x4000
  • 0x2b7 = 0x0

Will confirm with her on Monday.

#4 Updated by John Diamond about 4 years ago

  • % Done changed from 0 to 70

Switched the R:TOR703 ACNET device reading property to use the filter chain device ID (0xb0).

Also available in: Atom PDF