Project

General

Profile

Feature #14563

Limit the log size to be stored into CI DB

Added by Vito Di Benedetto over 3 years ago. Updated over 3 years ago.

Status:
Closed
Priority:
Normal
Category:
-
Target version:
Start date:
11/17/2016
Due date:
% Done:

100%

Estimated time:
Experiment:
-
Stakeholders:
Duration:

Description

Recently there were logs with a size of order of 1 Gb produced bu uboone unit test.
It is not wise to store these logs into the CI DB.
Set a threshold of 20 Mb for logs to be stored into the DB.
If a log has a larger size, in the DB it will be stored a log with a message that advise that the log size was too large. Then a link of the log on Jenkins can be provided to look at the log content.

Associated revisions

Revision a830bef2 (diff)
Added by Vito Di Benedetto over 3 years ago

From Michele: implementation of the limint on the log size issue #14563

Revision 060bf3d6 (diff)
Added by Vito Di Benedetto over 3 years ago

From Michele: implementation of the limint on the log size issue #14563

History

#1 Updated by Michele Fattoruso over 3 years ago

  • Status changed from Assigned to Resolved
  • % Done changed from 0 to 100

Feature implemented into the feature/michele_check_log_size branch into generic_ci
To properly work on extra log files,this two pattern should be added to the jenkins project configuration,into the "archive the artifact" form:

**/*.log
**/*.txt

this two patterns allows archiving .txt and .log files into the artifacts workspace, scanning the whole directory tree.

#2 Updated by Vito Di Benedetto over 3 years ago

  • Status changed from Resolved to Closed
  • Target version set to v1_0_0


Also available in: Atom PDF