Project

General

Profile

Feature #13830

R006: Spill.targetPos & Target.TARGPOS_CONTROL during manual target rotation

Added by Kenichi Nakano over 3 years ago. Updated about 3 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Start date:
09/10/2016
Due date:
% Done:

0%

Estimated time:
Duration:

Description

The target position during the manual target rotation (in roadset 62) has to be corrected. The correct target position is tabularized in DocDB #1713.

The "Spill.targetPos" field has been already corrected. The "Target.TARGPOS_CONTROL" value isn't. Shall we correct the latter?

The spill quality assurance requires "Spill.targetPos" = "Target.TARGPOS_CONTROL" and thus regard these spills as bad unless "Target.TARGPOS_CONTROL" is corrected.

History

#1 Updated by Kenichi Nakano over 3 years ago

  • Status changed from New to Feedback

Andrew and I discussed it and decided to change the "Target.TARGPOS_CONTROL" value together with the "Spill.targetPos" value when correcting the manual target position. Then the spill quality assurance will work fine as it is.

#2 Updated by Kenichi Nakano about 3 years ago

  • Status changed from Feedback to Closed

Andrew has changed the "Target.TARGPOS_CONTROL" value. Also Kenichi has updated the "Spill.dataQuality" field.



Also available in: Atom PDF