Project

General

Profile

Bug #13456

80MHz Digitizer requires repeating commands for re-arming twice

Added by Dennis Nicklaus almost 4 years ago. Updated almost 4 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Dennis Nicklaus
Start date:
08/05/2016
Due date:
% Done:

0%

Estimated time:
Spent time:
1.00 h
Duration:

Description

To get the digitizers to re-arm and re-trigger when in ScpExtArm mode,
I have to issue the "Enable Diag Int" and "Enable Copy/re-arm" commands twice each before it will run continuously.
I have to do:
Enable Diag Int
Enable Copy/re-arm
Enable Diag Int
Enable Copy/re-arm
Run

to get it to go. If I command 'Run' after the first pair of commands, it runs once, then stops (doesn't re-arm).

It would also be nice to have the two enable commands combined into one at some point, and to set
the board into that mode automatically at reboot.

History

#1 Updated by Dennis Nicklaus almost 4 years ago

  • Status changed from New to Resolved
  • Assignee set to Dennis Nicklaus

Resolved with change to intAttach function. commit 4f1ec611d083a6d70dbd046bfc9e8abd629f7d04

Also available in: Atom PDF