Project

General

Profile

Bug #13314

Set A32 Address Pointer to 0x0

Added by Roger Tokarek almost 3 years ago. Updated almost 3 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
Controller
Start date:
07/20/2016
Due date:
% Done:

100%

Estimated time:
0.50 h
Duration:

Description

Engineering Request

"The register 0x0C is the A32 address pointer for a different memory location and I left a default value of 0xA000000 for it in the firmware. Since the raw data pointer of the second board (the ring pickup) is using the same value, there is a conflict and the ring pickup’s waveform readout is garbage. I will remove this default value for future versions. As a quick fix, could you set a startup default value for register: 0x0C, D32 == 0x0?"

Completed. Modified pxintstartup with the following for each ADC board N:

#A32 Address Pointer
m 0xf0f00000+0xN000+0x0C,4
0X0
.

History

#1 Updated by Roger Tokarek almost 3 years ago

  • Status changed from Resolved to Closed


Also available in: Atom PDF