Bug #13029
Geometry tests fail
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
Geometry
Target version:
-
Start date:
06/23/2016
Due date:
% Done:
100%
Estimated time:
Description
The most thorough geometry tests are failing with the current geometry.
This is probably a problem of the geometry, not of the test.
The two tests have been disabled, and need to be checked again when the new geometry is in.
Associated revisions
History
#1 Updated by Gianluca Petrillo about 3 years ago
- Status changed from New to Resolved
- % Done changed from 0 to 100
With the new geometry (v 1.0) the geometry test does not fail any more.
Work from Gustavo Valdiviesso, Andrzej Szelc, Gianluca Petrillo and probably a few more people.
#2 Updated by Gianluca Petrillo about 3 years ago
- Status changed from Resolved to Closed
Added simulation + reconstruction chain and geometry to unit tests.
Geometry tests were there already, but disabled.
Two of them are failing, and we'll have to fix them (issue #13029).
The other test is a simulation + reconstruction job.
Right now the reconstruction job is standard_reco_sbnd_basic.fcl, because standard_reco_sbnd.fcl does not work.