Project

General

Profile

Feature #12028

Milestone #11650: Mar 2016 Release A - 201603A

On/off switch for readouts

Added by John Diamond over 4 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
DAQ
Start date:
03/22/2016
Due date:
% Done:

100%

Estimated time:
8.00 h
Spent time:
Duration:

Description

We should be able to enable & disable the raw and BBB readouts from ACNET or the CLI. Also, FFT readouts should only occur when the FFT intensity method is enabled.

History

#1 Updated by John Diamond over 4 years ago

  • % Done changed from 0 to 60
Implemented the following CLI commands for controlling the raw & bbb readouts for a given intensity device:
  • vmeintRawReadoutEnable( devId )
  • vmeintRawReadoutDisable( devId )
  • vmeintBBBReadoutEnable( devId )
  • vmeintBBBReadoutDisable( devId )

#2 Updated by John Diamond over 4 years ago

  • Status changed from New to Assigned
  • % Done changed from 60 to 80

Implemented status and control accessors in ADCACNET for the raw data devices.
Added status and control blocks to R:703RAW and verified that they behave as expected.

The same needs to be done for BBB readout...

#3 Updated by John Diamond over 4 years ago

  • % Done changed from 80 to 90
Created control and status blocks on the following raw data devices:
  • P:L10TOR
  • P:R50TOR
  • P:M01EPR
  • P:MX1FPR
  • P:MX0EPR

#4 Updated by John Diamond over 4 years ago

  • Status changed from Assigned to Closed
  • % Done changed from 90 to 100

Created status and control properties on Z:T990BB and tested the BBB readout switch.

Also available in: Atom PDF