Task #11264
Milestone #11262: March production reconstruction
Milestone #11261: Track finding and fitting improvements
Understand and fix broken track issue from Track3DKalmanTrack
10%
History
#1 Updated by Erica Snider almost 5 years ago
- Subject changed from Make TrackKalman3D respect gaps due to bad wires to Understand and fix broke track issue from Track3DKalmanTrack
- % Done changed from 0 to 10
Initially thought to be due to bad wires. Subsequently determined to be due to problems during fitting phase. Noted when using Pandora input, but not isolated to that case. Among other things, need to make this operate as a final fitter without any pattern-recognition.
LArSoft re-architecture work will isolate the fitting function so that a final fitter can be written, but this deliverable is scheduled for well after March 1.
In the mean time, the strategy will be to see if adjusting parameters can fix the problem for our purposes (that of just fitting tracks found by Pandora pattern-recognition, for instance).
#2 Updated by Erica Snider almost 5 years ago
- Subject changed from Understand and fix broke track issue from Track3DKalmanTrack to Understand and fix broken track issue from Track3DKalmanTrack
#3 Updated by Erica Snider almost 5 years ago
Libo, Anne and Tracy are working on this
#4 Updated by Tracy Usher over 4 years ago
- Status changed from New to Closed
This project was aiming for Neutrino 16 but was not completed. Task superseded by coming new implementation of track fit.